Last updated: August 2026
GORTEF supplies aftermarket PTFE heat seal tape, sheets, belts and bands to fit packaging machines already on your floor. Find your machine below by searching its model number or the OEM part number printed on the consumable, or browse by machine type or brand. Every product is manufactured in Australia and cut to your machine's dimensions.
All machine names, model designations and part numbers on this site belong to their respective owners and are quoted for cross-reference only. GORTEF supplies compatible replacement consumables and is not affiliated with, endorsed by or sponsored by any machine manufacturer.
Find Consumables For Your Machine
Showing 24 of 24 machines
- Cryovac 8600Seal bar cover tape
- Cryovac 8600-16 CSCurved seal bar cover tape
- Doboy B-550PTFE sealing bands
- Doboy B-500PTFE sealing bands
- Doboy B-450PTFE sealing bands
- Doboy B-555PTFE sealing bands
- Doboy HS-CIISteel sealing band with PTFE facing, band wick
- Doboy HS-CSteel sealing band with PTFE facing, band wick
- Multivac R145Sealing plate facing, platen release sheet
- Multivac R245Sealing plate facing, platen release sheet
- Multivac T300Sealing plate facing
- Technopack E-TUN-5030PTFE mesh conveyor belt
- Technopack E-TUN-5540PTFE mesh conveyor belt
- Technopack TUN-4535-HMPTFE mesh conveyor belt
- Technopack TUN-4525-HPTFE mesh conveyor belt
- Texwrap 2219Infeed and discharge belts, tunnel belt
- Texwrap 3022Infeed and discharge belts, tunnel belt
- Texwrap 3618Infeed and discharge belts, tunnel belt
- Syntegon Pack 401Crimp jaw tape, fin seal tape
- Syntegon Pack 403Crimp jaw tape, fin seal tape
- Syntegon Pack 403 HECrimp jaw tape, fin seal tape
- Rovema Continuous Motion VFFSForming tube tape, cross seal jaw tape
- Ilapak HFFS Flow WrappersCrimp jaw tape, fin seal tape, coated infeed belts
- IMA TMC Tissue Packaging & Bundling LinesPaired endless PTFE sealer belts
Browse By Machine Type
Browse By Brand AāZ
Ordering By OEM Part Number?
If you order consumables by the manufacturer's part number rather than by machine, the cross-reference table lists every OEM part we have an equivalent for, alongside the matching GORTEF product code.
View the OEM part cross-referenceFrequently Asked Questions
No. GORTEF manufactures aftermarket replacement consumables designed to fit the machines listed. They are not supplied by, endorsed by or affiliated with the machine manufacturers. OEM part numbers are quoted so you can identify the part you are replacing.
Almost always, yes. The list covers machines we are regularly asked about, not the limit of what we supply. PTFE tape is slit to any width and sheets are cut to any length, so send us the model number, the dimensions of the worn part, and a photo, and we will match it.
Match the thickness of the part you are removing. Most seal bar and jaw tapes are 3, 5 or 10 thou. If the OEM part is specified in mil, it is the same unit ā a 10 mil OEM tape is a 10 thou GORTEF tape. If you are unsure, measure the old part with a micrometer or send us a photo of the packaging.
Consumables are wear items rather than machine components, and in Australia a manufacturer cannot void a warranty simply because a consumable was not bought from them. Check your own service agreement, as terms vary between suppliers and service contracts.
Often, yes ā the cross-reference table lists the OEM part numbers we already have equivalents for. If your part number is not listed, send it along with the machine model and we will identify the construction, thickness and width and quote the matching GORTEF product.
