Last updated: August 2026
GORTEF supplies PTFE crimp jaw tape and fin seal tape to fit the PFM Falcon, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine PFM Packaging Machinery S.p.A. part.
The PFM Falcon is a horizontal flow wrapper making three-side sealed bags from an open reel, distributed in Australia and New Zealand by Emrich. Tape goes on the crimp jaws that form the end seals and on the fin wheels that close the longitudinal seam.
Which GORTEF Product Fits the PFM Falcon?
How to Order Tape for the PFM Falcon
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the PFM Falcon is the machine you are servicing, check the manufacturer's own listing:
PFM Falcon on the manufacturer's sitePFM and Falcon are trademarks or model designations of PFM Packaging Machinery S.p.A.. GORTEF is not affiliated with, endorsed by or sponsored by PFM Packaging Machinery S.p.A.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
