Last updated: August 2026
GORTEF supplies aftermarket curved seal bar cover tape to fit the Cryovac 8600-16 CS. It is cut to your machine's dimensions, so you can replace the worn part without ordering through Sealed Air Corporation.
The 16-inch curved-seal variant of the 8600. Takes the same 10 mil PTFE seal bar tape, die-cut to the curved bar profile.
Which OEM Part Does This Replace?
| OEM part number | Description |
|---|---|
| PV15M005 | Heat seal tape, curved seal, 25 pack |
Part numbers belong to Sealed Air Corporation and are listed so you can identify the part being replaced. GORTEF products are aftermarket equivalents, not genuine manufacturer parts.
Which GORTEF Product Fits?
Confirming The Exact Specification
We are still finalising the published dimensions for this model. Send us the width, length and thickness of the part you are removing — or a photo of it alongside its packaging — and we will confirm the exact construction before you order. Measuring the old part with a micrometer is the most reliable check.
How Do I Order For The Cryovac 8600-16 CS?
Tell us the machine model, the width of the part you are replacing, and the thickness. PTFE tape is slit to any width in 30 metre rolls; sheet is supplied 1000mm wide and cut to any length from 1 to 30 metres; belts and bands are made endless to your measured length. If the OEM part is specified in mil, it is the same unit as our thou — a 10 mil OEM tape is a 10 thou GORTEF tape.
Cryovac and 8600-16 CS are trademarks or model designations of Sealed Air Corporation. GORTEF is not affiliated with, endorsed by or sponsored by Sealed Air Corporation. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
