Last updated: August 2026
GORTEF supplies PTFE crimp jaw tape and fin seal tape to fit the ULMA Baltic, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine ULMA Packaging S. Coop. part.
The Baltic wraps case-ready meat and poultry trays in stretch shrink film to make a leak-proof pack, on a stainless frame with a two metre infeed. Stretch shrink film is tackier than standard flow wrap film, which is exactly the condition PTFE tape on the jaws exists to deal with.
Which GORTEF Product Fits the ULMA Baltic?
How to Order Tape for the ULMA Baltic
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the ULMA Baltic is the machine you are servicing, check the manufacturer's own listing:
ULMA Baltic on the manufacturer's siteULMA and Baltic are trademarks or model designations of ULMA Packaging S. Coop.. GORTEF is not affiliated with, endorsed by or sponsored by ULMA Packaging S. Coop.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
