Last updated: August 2026
GORTEF supplies aftermarket steel sealing band with ptfe facing, band wick to fit the Doboy HS-CII. It is cut to your machine's dimensions, so you can replace the worn part without ordering through Syntegon Technology (formerly Bosch Packaging).
Hand-fed band sealer. Takes a steel band with a PTFE facing plus a felt band wick.
Which OEM Part Does This Replace?
| OEM part number | Description |
|---|---|
| 335555 | Sealing band, steel with PTFE facing |
| 016-00087 | Band wick (felt), fits HS-C and HS-CII |
Part numbers belong to Syntegon Technology (formerly Bosch Packaging) and are listed so you can identify the part being replaced. GORTEF products are aftermarket equivalents, not genuine manufacturer parts.
Confirming The Exact Specification
We are still finalising the published dimensions for this model. Send us the width, length and thickness of the part you are removing — or a photo of it alongside its packaging — and we will confirm the exact construction before you order. Measuring the old part with a micrometer is the most reliable check.
How Do I Order For The Doboy HS-CII?
Tell us the machine model, the width of the part you are replacing, and the thickness. PTFE tape is slit to any width in 30 metre rolls; sheet is supplied 1000mm wide and cut to any length from 1 to 30 metres; belts and bands are made endless to your measured length. If the OEM part is specified in mil, it is the same unit as our thou — a 10 mil OEM tape is a 10 thou GORTEF tape.
Doboy and HS-CII are trademarks or model designations of Syntegon Technology (formerly Bosch Packaging). GORTEF is not affiliated with, endorsed by or sponsored by Syntegon Technology (formerly Bosch Packaging). All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
