Last updated: August 2026
GORTEF supplies aftermarket crimp jaw tape, fin seal tape, coated infeed belts to fit the Ilapak HFFS Flow Wrappers. It is cut to your machine's dimensions, so you can replace the worn part without ordering through IMA Ilapak.
Horizontal form-fill-seal flow wrapper range.
Which GORTEF Product Fits?
Confirming The Exact Specification
We are still finalising the published dimensions for this model. Send us the width, length and thickness of the part you are removing — or a photo of it alongside its packaging — and we will confirm the exact construction before you order. Measuring the old part with a micrometer is the most reliable check.
How Do I Order For The Ilapak HFFS Flow Wrappers?
Tell us the machine model, the width of the part you are replacing, and the thickness. PTFE tape is slit to any width in 30 metre rolls; sheet is supplied 1000mm wide and cut to any length from 1 to 30 metres; belts and bands are made endless to your measured length. If the OEM part is specified in mil, it is the same unit as our thou — a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have The Right Machine
Model designations vary between regions and production years. To confirm the Ilapak HFFS Flow Wrappers is the machine you are servicing, check the manufacturer's own listing:
Ilapak HFFS Flow Wrappers on the manufacturer's siteIlapak and HFFS Flow Wrappers are trademarks or model designations of IMA Ilapak. GORTEF is not affiliated with, endorsed by or sponsored by IMA Ilapak. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
