Last updated: August 2026
The Cryovac 8600 takes a die-cut PTFE cover tape over its seal bar, and Sealed Air specify that tape at 10 mil. Mil and thou are the same unit, so the replacement is a 10 thou PTFE-coated glass fabric with a single-sided silicone adhesive: GORTEF TCG010AD, an exact thickness match rather than the nearest size up.
We slit it to your seal bar width in 30 metre rolls. The OEM part comes as a pre-cut pack, so a roll covers a run of changeovers instead of one.
Which OEM Parts Does This Machine Use?
| OEM part number | Description | GORTEF equivalent |
|---|---|---|
| PV15M005 | Heat seal tape, 8600B-16CS, curved seal | TCG010AD |
| ZPV15M005 | Seal bar die-cut single side tape, 10 mil | TCG010AD |
| TA-0467 | Teflon tape 2 in wide x 10 yards | TCG010AD |
Part numbers belong to Sealed Air Corporation and are listed so you can identify the part being replaced. GORTEF supplies PTFE only: tape, bands, belts, sleeves and sheet. A part made of anything else is listed here to identify the machine, not because we stock it. What we do supply is an aftermarket equivalent, not a genuine manufacturer part.
Which GORTEF Product Fits the Cryovac 8600?
The OEM seal bar tape is a 10 mil (10 thou) PTFE-coated glass fabric with a single-sided high-temperature silicone adhesive. GORTEF TCG010AD is the same construction at the same 10 thou thickness, slit to your seal bar width in 30 metre rolls rather than pre-cut packs.
Which of the Three Cryovac Part Numbers Do You Have?
Three Sealed Air numbers cover tape on this machine and they are not interchangeable descriptions of one item. ZPV15M005 is the die-cut single-side tape at 10 mil, which is the profiled piece that sits over the bar. PV15M005 is the curved-seal tape listed against the 8600B-16CS. TA-0467 is plain 2 inch tape on a 10 yard roll, which is what gets ordered when someone is patching rather than doing a full changeover.
All three are the same 10 thou construction, so all three cross-reference to TCG010AD. What differs is the cut and the quantity, and that is the part we need from you: the width across the bar, and whether the bar is straight or curved.
How to Order Tape for the Cryovac 8600
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Cryovac 8600 is the machine you are servicing, check the manufacturer's own listing:
Cryovac 8600 on the manufacturer's siteFrequently Asked Questions
Sealed Air specify the seal bar tape at 10 mil. Mil is the same unit as thou, so a 10 mil OEM tape is a 10 thou tape. GORTEF TCG010AD is that thickness, published at 0.22mm backing and 0.27mm total including the adhesive.
TCG010AD. It is the same construction as the OEM tape, PTFE-coated glass fabric with a single-sided high-temperature silicone adhesive, at the same 10 thou thickness. ZPV15M005 and TA-0467 cross-reference to the same code.
Tell us the bar width and whether it is straight or curved when you send your enquiry. We supply the tape slit to width in 30 metre rolls rather than as a pre-cut pack, which is why a roll lasts across several changeovers.
Continuous service from -73°C to +260°C, which covers the seal bar temperatures a Cryovac 8600 runs at with margin in hand.
No. It is an aftermarket replacement. GORTEF is not affiliated with Sealed Air Corporation, and the Cryovac part numbers on this page are quoted so you can identify the part you are replacing.
Cryovac and 8600 are trademarks or model designations of Sealed Air Corporation. GORTEF is not affiliated with, endorsed by or sponsored by Sealed Air Corporation. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
