Last updated: August 2026
GORTEF supplies PTFE separator feed belts to fit the Eriez RE-60-2, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine Eriez Manufacturing Co. part.
The RE-60-2 is the double roll build at 60 inch width, running a second separation stage on the non-magnetic product of the first. Two rolls means two belts, and they do not wear at the same rate: the first stage takes the full feed and the second only what the first passed, so a changeover is rarely a matched pair.
Which GORTEF Product Fits the Eriez RE-60-2?
Both stages take a 60 inch belt at 1524mm, and both come out of the 1660mm fabric in one piece. They will not often need replacing together: order the pair when the machine is due a full changeover, order one when only the first stage has gone.
Confirming the Exact Specification
We are still finalising the published dimensions for this model. Send us the dimensions of the belt you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the old belt itself where you can. Working back from the machine aperture or the roller centres gives a length that is close but rarely exact.
How to Order a Belt for the Eriez RE-60-2
Measure the belt across its width and right around its length, and tell us how the ends are joined. We make PTFE belts endless to the length you measure and finish the edges to suit the way your machine tracks them.
If the old belt is already off the machine, measure it flat and send a photo of the join with your dimensions. The join type matters as much as the length for how a belt runs.
Eriez and RE-60-2 are trademarks or model designations of Eriez Manufacturing Co. GORTEF is not affiliated with, endorsed by or sponsored by Eriez Manufacturing Co. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
