Last updated: August 2026
GORTEF supplies PTFE platen cover sheet and separator sheet to fit the Hashima HP-125FA, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine HASHIMA CO., LTD. part.
The HP-125FA is a flat fusing press rather than a belt machine, so the panel is closed between heated platens. The consumable here is non-adhesive PTFE sheet used as a reusable platen cover and separator, cut to the platen rather than made endless. Measure the platen itself, not the old sheet, which will have been trimmed to fit.
Which GORTEF Product Fits the Hashima HP-125FA?
Confirming the Exact Specification
We are still finalising the published dimensions for this model. Send us the dimensions of the sheet you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the plate you are facing rather than the old sheet, which will have been trimmed to fit and may have shrunk back at the edges.
How to Order Sheet for the Hashima HP-125FA
Tell us the thickness you need and the size of the area you are covering. PTFE sheet comes 1000mm wide and is cut to any length between 1 and 30 metres.
Say whether you need it self-adhesive or plain, because a plate being refaced and a release sheet that is lifted out between cycles take different grades.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Hashima HP-125FA is the machine you are servicing, check the manufacturer's own listing:
Hashima HP-125FA on the manufacturer's siteHashima and HP-125FA are trademarks or model designations of HASHIMA CO., LTD. GORTEF is not affiliated with, endorsed by or sponsored by HASHIMA CO., LTD. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
