PTFE Element Cover Tape for the Gandus Saldatrici TB 3

Which OEM Parts Does This Machine Use?

Part numbers belong to Gandus Saldatrici S.r.l. and are listed so you can identify the part being replaced. GORTEF supplies PTFE only: tape, bands, belts, sleeves and sheet. A part made of anything else is listed here to identify the machine, not because we stock it. What we do supply is an aftermarket equivalent, not a genuine manufacturer part.

Which GORTEF Product Fits the Gandus Saldatrici TB 3?

TCG003AD

TCG005AD

• PTFE heat seal tape: specifications and ordering

Confirming the Exact Specification

We are still finalising the published dimensions for this model. Send us the dimensions of the tape you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Thickness is the number people get wrong, so measure the old tape with a micrometer rather than reading it off the OEM listing.

How to Order Tape for the Gandus Saldatrici TB 3

Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.

OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.

Check You Have the Right Machine

Model designations vary between regions and production years. To confirm the Gandus Saldatrici TB 3 is the machine you are servicing, check the manufacturer's own listing:

Gandus Saldatrici and TB 3 are trademarks or model designations of Gandus Saldatrici S.r.l.. GORTEF is not affiliated with, endorsed by or sponsored by Gandus Saldatrici S.r.l.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.