PTFE Sealing Plate Facing for the Sealpac A7max

Which OEM Parts Does This Machine Use?

Part numbers belong to SEALPAC GmbH and are listed so you can identify the part being replaced. GORTEF supplies PTFE only: tape, bands, belts, sleeves and sheet. A part made of anything else is listed here to identify the machine, not because we stock it. What we do supply is an aftermarket equivalent, not a genuine manufacturer part.

Which GORTEF Product Fits the Sealpac A7max?

TCG010NA-1000W

• Non-adhesive PTFE sheets: specifications and ordering

Confirming the Exact Specification

We are still finalising the published dimensions for this model. Send us the dimensions of the sheet you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the plate you are facing rather than the old sheet, which will have been trimmed to fit and may have shrunk back at the edges.

How to Order Sheet for the Sealpac A7max

Tell us the thickness you need and the size of the area you are covering. PTFE sheet comes 1000mm wide and is cut to any length between 1 and 30 metres.

Say whether you need it self-adhesive or plain, because a plate being refaced and a release sheet that is lifted out between cycles take different grades.

Check You Have the Right Machine

Model designations vary between regions and production years. To confirm the Sealpac A7max is the machine you are servicing, check the manufacturer's own listing:

Sealpac and A7max are trademarks or model designations of SEALPAC GmbH. GORTEF is not affiliated with, endorsed by or sponsored by SEALPAC GmbH. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.