Last updated: August 2026
GORTEF supplies PTFE seal blade tape to fit the Minipack-Torre FM76 EVO, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine Minipack-Torre S.p.A. part.
The FM76 EVO is a bell-type shrink sealer that seals and shrinks inside one chamber rather than passing the pack to a tunnel. The sealing blade runs under a PTFE cover tape, which takes the heat of every cycle and is replaced long before anything else on the machine.
Which GORTEF Product Fits the Minipack-Torre FM76 EVO?
How to Order Tape for the Minipack-Torre FM76 EVO
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Minipack-Torre FM76 EVO is the machine you are servicing, check the manufacturer's own listing:
Minipack-Torre FM76 EVO on the manufacturer's siteMinipack-Torre and FM76 EVO are trademarks or model designations of Minipack-Torre S.p.A.. GORTEF is not affiliated with, endorsed by or sponsored by Minipack-Torre S.p.A.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
