PTFE Crimp Jaw Tape and Fin Seal Tape for the ULMA Artic

Which OEM Parts Does This Machine Use?

Part numbers belong to ULMA Packaging S. Coop. and are listed so you can identify the part being replaced. GORTEF supplies PTFE only: tape, bands, belts, sleeves and sheet. A part made of anything else is listed here to identify the machine, not because we stock it. What we do supply is an aftermarket equivalent, not a genuine manufacturer part.

Which GORTEF Product Fits the ULMA Artic?

TCG003AD

TCG005AD

• PTFE heat seal tape: specifications and ordering

Confirming the Exact Specification

We are still finalising the published dimensions for this model. Send us the dimensions of the tape you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Thickness is the number people get wrong, so measure the old tape with a micrometer rather than reading it off the OEM listing.

How to Order Tape for the ULMA Artic

Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.

OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.

Check You Have the Right Machine

Model designations vary between regions and production years. To confirm the ULMA Artic is the machine you are servicing, check the manufacturer's own listing:

ULMA and Artic are trademarks or model designations of ULMA Packaging S. Coop.. GORTEF is not affiliated with, endorsed by or sponsored by ULMA Packaging S. Coop.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.