PTFE Separator Feed Belt for the Mineral Technologies Reading Semi-Lift IRMS

Which OEM Parts Does This Machine Use?

Part numbers belong to Mineral Technologies Pty Ltd and are listed so you can identify the part being replaced. GORTEF supplies PTFE only: tape, bands, belts, sleeves and sheet. A part made of anything else is listed here to identify the machine, not because we stock it. What we do supply is an aftermarket equivalent, not a genuine manufacturer part.

Confirming the Exact Specification

We are still finalising the published dimensions for this model. Send us the dimensions of the belt you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the old belt itself where you can. Working back from the machine aperture or the roller centres gives a length that is close but rarely exact.

How to Order a Belt for the Mineral Technologies Reading Semi-Lift IRMS

Measure the belt across its width and right around its length, and tell us how the ends are joined. We make PTFE belts endless to the length you measure and finish the edges to suit the way your machine tracks them.

If the old belt is already off the machine, measure it flat and send a photo of the join with your dimensions. The join type matters as much as the length for how a belt runs.

Check You Have the Right Machine

Model designations vary between regions and production years. To confirm the Mineral Technologies Reading Semi-Lift IRMS is the machine you are servicing, check the manufacturer's own listing:

Mineral Technologies and Reading Semi-Lift IRMS are trademarks or model designations of Mineral Technologies Pty Ltd. GORTEF is not affiliated with, endorsed by or sponsored by Mineral Technologies Pty Ltd. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.