Last updated: August 2026
GORTEF supplies PTFE mesh conveyor belt to fit the Technopack E-TUN-5540, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine Technopack Corporation part.
The E-TUN-5540 runs an open-weave PTFE mesh belt through the heated section, with cooling fans over the outfeed to set the film before the pack is handled. The belt is made endless and cut to the width of the tunnel.
Confirming the Exact Specification
Tell us what you are replacing and we will match it. Send the dimensions of the belt you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the old belt itself where you can. Working back from the machine aperture or the roller centres gives a length that is close but rarely exact.
How to Order a Belt for the Technopack E-TUN-5540
Measure the belt across its width and right around its length, and tell us how the ends are joined. We make PTFE belts endless to the length you measure and finish the edges to suit the way your machine tracks them.
If the old belt is already off the machine, measure it flat and send a photo of the join with your dimensions. The join type matters as much as the length for how a belt runs.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Technopack E-TUN-5540 is the machine you are servicing, check the manufacturer's own listing:
Technopack E-TUN-5540 on the manufacturer's siteTechnopack and E-TUN-5540 are trademarks or model designations of Technopack Corporation. GORTEF is not affiliated with, endorsed by or sponsored by Technopack Corporation. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
