Last updated: August 2026
GORTEF supplies PTFE forming tube tape and cross seal jaw tape to fit the Rovema BVC 400, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine ROVEMA GmbH part.
The BVC 400 runs to 150 cycles a minute at a maximum forming width of 400 mm, and the frozen food build is servo driven in stainless. At 150 bags a minute the cross seal jaws close 150 times a minute, which is what sets the tape interval on this machine rather than the hours it is switched on.
Which GORTEF Product Fits the Rovema BVC 400?
How to Order Tape for the Rovema BVC 400
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Rovema BVC 400 is the machine you are servicing, check the manufacturer's own listing:
Rovema BVC 400 on the manufacturer's siteRovema and BVC 400 are trademarks or model designations of ROVEMA GmbH. GORTEF is not affiliated with, endorsed by or sponsored by ROVEMA GmbH. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
