Last updated: August 2026
GORTEF supplies PTFE sealing plate facing to fit the Multivac T 260, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine MULTIVAC Sepp Haggenmüller SE & Co. KG part.
The T 260 is the semi-automatic tray sealer in the Australian range, running six cycles a minute with monitored sealing pressure and regulated tool temperature. Machines that hold sealing pressure to a tolerance are the ones where a worn plate facing shows up quickly, because the pressure is right and the seal still fails.
Which GORTEF Product Fits the Multivac T 260?
Confirming the Exact Specification
Tell us what you are replacing and we will match it. Send the dimensions of the sheet you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the plate you are facing rather than the old sheet, which will have been trimmed to fit and may have shrunk back at the edges.
How to Order Sheet for the Multivac T 260
Tell us the thickness you need and the size of the area you are covering. PTFE sheet comes 1000mm wide and is cut to any length between 1 and 30 metres.
Say whether you need it self-adhesive or plain, because a plate being refaced and a release sheet that is lifted out between cycles take different grades.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Multivac T 260 is the machine you are servicing, check the manufacturer's own listing:
Multivac T 260 on the manufacturer's siteMultivac and T 260 are trademarks or model designations of MULTIVAC Sepp Haggenmüller SE & Co. KG. GORTEF is not affiliated with, endorsed by or sponsored by MULTIVAC Sepp Haggenmüller SE & Co. KG. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
