Last updated: August 2026
GORTEF supplies paired endless PTFE sealer belts to fit the IMA TMC Tissue Packaging & Bundling Lines, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine IMA Group part.
Tissue and hygiene packaging lines run two endless pairs of PTFE sealer belts positioned either side of the packs as they pass through the heating section, acting as the heat-resistant non-stick barrier between the heaters and the wrapped rolls.
Confirming the Exact Specification
Tell us what you are replacing and we will match it. Send the dimensions of the belt you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Measure the old belt itself where you can. Working back from the machine aperture or the roller centres gives a length that is close but rarely exact.
How to Order a Belt for the IMA TMC Tissue Packaging & Bundling Lines
Measure the belt across its width and right around its length, and tell us how the ends are joined. We make PTFE belts endless to the length you measure and finish the edges to suit the way your machine tracks them.
If the old belt is already off the machine, measure it flat and send a photo of the join with your dimensions. The join type matters as much as the length for how a belt runs.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the IMA TMC Tissue Packaging & Bundling Lines is the machine you are servicing, check the manufacturer's own listing:
IMA TMC Tissue Packaging & Bundling Lines on the manufacturer's siteIMA TMC and Tissue Packaging & Bundling Lines are trademarks or model designations of IMA Group. GORTEF is not affiliated with, endorsed by or sponsored by IMA Group. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
