Last updated: August 2026
GORTEF supplies PTFE crimp jaw tape and fin seal tape to fit the Syntegon Pack 403 HE, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine Syntegon Technology GmbH part.
The Pack 403 HE is the high-efficiency variant of the Pack 403 horizontal flow wrapper. It tapes in the same two places as the standard 403, on the crimp jaws and the fin wheels.
Which GORTEF Product Fits the Syntegon Pack 403 HE?
Confirming the Exact Specification
Tell us what you are replacing and we will match it. Send the dimensions of the tape you are removing, or a photo of it alongside its packaging, and we will confirm the construction before you order. Thickness is the number people get wrong, so measure the old tape with a micrometer rather than reading it off the OEM listing.
How to Order Tape for the Syntegon Pack 403 HE
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Syntegon Pack 403 HE is the machine you are servicing, check the manufacturer's own listing:
Syntegon Pack 403 HE on the manufacturer's siteSyntegon and Pack 403 HE are trademarks or model designations of Syntegon Technology GmbH. GORTEF is not affiliated with, endorsed by or sponsored by Syntegon Technology GmbH. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
