Last updated: August 2026
GORTEF supplies PTFE seal bar cover tape to fit the Henkelman Jumbo 35, made to the dimensions you measure off your own machine. It is an aftermarket replacement rather than a genuine Henkelman B.V. part.
The Jumbo 35 is the entry table-top machine in the range, with time control, one program memory and a choice of double or cut-off sealing. A cut-off seal runs hotter than a double seal, so the same machine can go through cover tape at two quite different rates depending on which mode it is set to.
Which GORTEF Product Fits the Henkelman Jumbo 35?
How to Order Tape for the Henkelman Jumbo 35
Tell us the width and thickness of the tape you are stripping off and we will slit a roll to match. GORTEF supplies PTFE tape in 30 metre rolls at any width you need.
OEM tapes are usually specified in mil. That is the same unit as our thou, so a 10 mil OEM tape is a 10 thou GORTEF tape.
Check You Have the Right Machine
Model designations vary between regions and production years. To confirm the Henkelman Jumbo 35 is the machine you are servicing, check the manufacturer's own listing:
Henkelman Jumbo 35 on the manufacturer's siteHenkelman and Jumbo 35 are trademarks or model designations of Henkelman B.V.. GORTEF is not affiliated with, endorsed by or sponsored by Henkelman B.V.. All names and part numbers are used for identification and cross-reference only, and every GORTEF product described here is an aftermarket replacement product rather than a genuine manufacturer part.
