Phone
02 9938 4493
Mobile
0404 876 203
Fax
02 9938 4496
Address
Suite 35 Level 2
42 - 46 Wattle Road
Brookvale, NSW, Australia, 2100
ALLIGATORAlligator Belt Joints are stainless steel metallic fasteners with a tie bar across the back preventing any individual pieces coming away and potentially falling in to food products. These allow belts to easily to fitted and removed from conveyors | |
BUTTButt Belt Joints tend to be manufactured prior to fitting on the machine and are manufactured using a strap on the underside to offer additional strength. This method is a simple but very effective on making a belt endless. | |
CASTELLATED
| |
CLIPPERClipper Joints are very similar to Alligator types but tend to be smaller and more light weight. These allow the belt to be fitted and removed with ease | |
COVERCover Belt Joints - Covers can be applied after joints have been fitted to act a barrier between the metallic surface of the joint and the product being conveyed | |
FINGERFinger Belt Joints - Finger joints are manufactured in a similar way to butt types but offer less stress on the joint and the jointed are is spread. | |
OVERLAPOverlap Belt Joints - Overlap joints are a simple and easy joint to use where having an even surface is not critical. This type of joint can easy be made on a machine where the belt needs to be fitted onsite. | |
SCARFEDScarfed Belt Joints - A scarf joint is similar the overlap butt offer a smooth transition for the product to run offering no lip for products to catch on. | |
BULLNOSE | |
CASTELLATED |